1-800-561-8187

information@ITM.com

Customer Reviews
  • Cart (0)
  • |
  • My Quote (0)
    •  
     

    Fluke i430 Flex Current Probe

    Model: I430-FLEX

    Fluke i430 Flex Current Probe-

    Fluke i430 Flex Current Probe

    Model: I430-FLEX

    Measures up to 3000 Amps.

    Measures up to 3000 Amps.

    Discontinued!

    This product has been discontinued and is no longer available.
    This is the direct replacement:

    Fluke I430-Flexi-TF-II Flexible CTs-

    Fluke I430-Flexi-TF-II Flexible CTs

    Model: I430-FLEXI-TF-II

    These flexible CTs have a 24 inch opening and a measurement range up to 6,000A.

    Learn More

    Fluke I430-FLEX Offers

    The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
    Also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.

    Fluke I430-FLEX Specifications

    General Specifications
    Probe and Cable Material

    		 TPE rubber, reinforced insulation

    		 UL94 V-0, Colour: RED Munsell 7.5

    		 R 1/14
    Couplings Material

    		 Polypropylene, UL94 V-0
    Probe Cable Length

    		 610 mm
    Probe Cable Diameter

    		 12.4 mm
    Probe Cable Bend Radius

    		 40 mm
    Output cable length

    		 2.5 meters RG58
    Output Connector

    		 Safety BNC Connector
    Operating Range

    		 -20 to +90°C
    Storage Temperature

    		-40 to +105°C
    Operating Humidity

    		 15% to 85% (non condensing)
    Degree of protection (Probe)

    		 IP41

    Specifications
    Current Range

    		 3000 A AC RMS
    Voltage output (@1000 ARMS, 50 Hz)

    		 85 mV
    Accuracy

    		 ± 1% of reading

    		 (@ 25°C, 50 Hz)
    Linearity (10% to 100% of range)

    		 ± 0.2% of reading
    Noise (10 Hz - 7 kHz)

    		 1.0 mV ACRMS
    Output impedance

    		 82 Ω min
    Load Impedance

    		 50 kΩ
    Internal Resistance per 100 mm probe length

    		 10.5Ω ± 5%
    Bandwidth (-3dB)

    		 10 Hz to 7 kHz
    Phase Error (45 - 65 Hz)

    		 ±1°
    Position Sensitivity

    		 ± 2% of reading max.
    Temperature Coefficient

    		 ± 0.08% max of reading per °C
    Working Voltage (see Safety Standards section)

    		 1000 V AC RMS or DC (head)

    		 30 V max. (output)

    Safety Specifications
    Safety Standards

    		 BS EN 61010-1 2001

    		 BS EN 61010-2-032 2002

    		 BS EN 61010-031 2002, 1000 VRMS, Category III, Pollution Degree 2

    		 Use of the probe on uninsulated conductors is limited to 1000 V ACRMS or DC and frequencies below 1 kHz.

    		 Please note that this probe is designed to work with Fluke 435, if used with other products

    		 safety rating for the output to earth is limited to 600V ACRMS or DC.

    What's included with the Fluke I430-FLEX

    • Fluke i430 Flex Current Probe

    Click on a category to view a selection of compatible accessories with the Fluke i430 Flex Current Probe.

    Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
    Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.



    Ask a question about Fluke i430 Flex Current Probe

    Customer Reviews for the Fluke I430-FLEX

    Fluke I430-FLEX Offers

    The i430 Flex is an AC current probe utilizing the Rogowski principle. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.
    Also available as a pack of 4 pieces of the i430 current clamp, to be used for high current measurements. The Flex clamp fits around bus bars and large or hard-to-reach conductors. This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series.
    Show More...

    Fluke I430-FLEX Specifications

    General Specifications
    Probe and Cable Material

    		 TPE rubber, reinforced insulation

    		 UL94 V-0, Colour: RED Munsell 7.5

    		 R 1/14
    Couplings Material

    		 Polypropylene, UL94 V-0
    Probe Cable Length

    		 610 mm
    Probe Cable Diameter

    		 12.4 mm
    Probe Cable Bend Radius

    		 40 mm
    Output cable length

    		 2.5 meters RG58
    Output Connector

    		 Safety BNC Connector
    Operating Range

    		 -20 to +90°C
    Storage Temperature

    		-40 to +105°C
    Operating Humidity

    		 15% to 85% (non condensing)
    Degree of protection (Probe)

    		 IP41

    Specifications
    Current Range

    		 3000 A AC RMS
    Voltage output (@1000 ARMS, 50 Hz)

    		 85 mV
    Accuracy

    		 ± 1% of reading

    		 (@ 25°C, 50 Hz)
    Linearity (10% to 100% of range)

    		 ± 0.2% of reading
    Noise (10 Hz - 7 kHz)

    		 1.0 mV ACRMS
    Output impedance

    		 82 Ω min
    Load Impedance

    		 50 kΩ
    Internal Resistance per 100 mm probe length

    		 10.5Ω ± 5%
    Bandwidth (-3dB)

    		 10 Hz to 7 kHz
    Phase Error (45 - 65 Hz)

    		 ±1°
    Position Sensitivity

    		 ± 2% of reading max.
    Temperature Coefficient

    		 ± 0.08% max of reading per °C
    Working Voltage (see Safety Standards section)

    		 1000 V AC RMS or DC (head)

    		 30 V max. (output)

    Safety Specifications
    Safety Standards

    		 BS EN 61010-1 2001

    		 BS EN 61010-2-032 2002

    		 BS EN 61010-031 2002, 1000 VRMS, Category III, Pollution Degree 2

    		 Use of the probe on uninsulated conductors is limited to 1000 V ACRMS or DC and frequencies below 1 kHz.

    		 Please note that this probe is designed to work with Fluke 435, if used with other products

    		 safety rating for the output to earth is limited to 600V ACRMS or DC.

    What's included with the Fluke I430-FLEX

    • Fluke i430 Flex Current Probe

    Click on a category to view a selection of compatible accessories with the Fluke i430 Flex Current Probe.

    Fluke TB25 Tool Bucket Organizer Bag, 5.2 gal TB25
    Durable and rugged, this tool bucket organizer bag has a 5.2-gallon capacity that can be relied on to protect and safely carry a variety of test tools and accessories. With its waterproof hard bottom shell, this versatile organizer has a total of 28 pockets that can fit hand tools, DMMs, clamp meters, test probes, and more.



    Ask a question about Fluke i430 Flex Current Probe

    Customer Reviews for the Fluke I430-FLEX

    More Fluke Products

    • We accept these payment methods:
    • Visa, Master Card, Discover, American Express & PayPal
    • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.
      • This is a Secure Online Store. We are PCI Compliant.