This scopemeter delivers greater accuracy and clarity. Ideal test tool for plant maintenance engineers and technicians, designed to withstand harsh, dirty, and hazardous industrial conditions.
This scopemeter delivers greater accuracy and clarity. Ideal test tool for plant maintenance engineers and technicians, designed to withstand harsh, dirty, and hazardous industrial conditions.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients.
Features
Infrared cameras, also called thermal imagers, are useful for troubleshooting motor problems as well as for monitoring motor condition for preventative maintenance in power generation, manufacturing and commercial plants. Thermal images of motors reveal their operating condition as indicated by surface temperature. Such condition monitoring is important as a way to avert many unexpected motor malfunctions in systems that are critical to manufacturing. The onset of motor failures can often be detected by a variety of techniques, including vibration, ultrasound and thermal imaging.
In this article, we cover why use thermal imaging and what to scan, as well as some notes on what to look for, including shaft misalignment.
Read the Article
| Bandwidth | 500 MHz |
| Number of Channels | 4 |
| Real-Time Sample Rate | 5 GS/s |
| Inputs | 4 x BNc input scope plus DMM input |
| Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Input Sensitivity | 2 mV-100 V/div plus variable attenuation |
| Trigger Types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger Source | 4 x BNC input |
| Glitch Capture | 8 ns |
| Maximum Record Length | ScopeRecord Mode: 30,000 pts per input Scope Mode: 10,000 pts per input |
| Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform Compare | Waveform reference with automatic pass/fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-504/UN ScopeMeter Test Tool, 500MHz, 4 Channel.
| Bandwidth | 500 MHz |
| Number of Channels | 4 |
| Real-Time Sample Rate | 5 GS/s |
| Inputs | 4 x BNc input scope plus DMM input |
| Independently Floating Isolated Inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Input Sensitivity | 2 mV-100 V/div plus variable attenuation |
| Trigger Types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger Source | 4 x BNC input |
| Glitch Capture | 8 ns |
| Maximum Record Length | ScopeRecord Mode: 30,000 pts per input Scope Mode: 10,000 pts per input |
| Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform Compare | Waveform reference with automatic pass/fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-504/UN ScopeMeter Test Tool, 500MHz, 4 Channel.
