This portable oscilloscope offers the same performance as a bench scope with feature rich capabilities to tackle just about any troubleshooting task.
This portable oscilloscope offers the same performance as a bench scope with feature rich capabilities to tackle just about any troubleshooting task.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
Simplify electrical signal analysis and diagnose equipment failures in the field with the Fluke 190-502. The portable oscilloscope offers the same performance as a bench scope with feature–rich capabilities to tackle just about any troubleshooting task. Designed for plant maintenance engineers and technicians, the 190 ScopeMeter® Series goes into harsh and dirty industrial conditions to test everything from microelectronics to power electronics applications.
The Fluke 190-502 two-channel portable oscilloscope features a CAT III 1000V/CAT IV 600V safety rating and is IP-51 rated to withstand harsh environments. Get unprecedented ease-of-use with Connect-and-View™ triggering to capture and analyze waveforms hands free. With 500MHz bandwidth and real-time sampling rates up to 5 GS/sec, you can quickly and easily capture noise and other disturbances to quickly make sense of your signals and eliminate the tedium of troubleshooting.
Features
Applications
| Bandwidth | 500 MHz |
| Number of Channels | 2 channels |
| Real-time Sample Rate | 5 GS |
| Inputs | 4 scope or 2 scope plus DMM input |
| Independently floating isolated inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Input sensitivity | 2 mV-100 V/div |
| Trigger types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger Source | Any scope input channel, or external via DMM input on 190-XX2, 2 channel models |
| Glitch capture | 8 ns |
| Scope Measurements | Cursor: 7, Automatic: 30 |
| Max. Record Length | ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input |
| Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-502/AM Color ScopeMeter Color Test tool, 2 Channel, 500MHz.
| Bandwidth | 500 MHz |
| Number of Channels | 2 channels |
| Real-time Sample Rate | 5 GS |
| Inputs | 4 scope or 2 scope plus DMM input |
| Independently floating isolated inputs | Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground |
| Input sensitivity | 2 mV-100 V/div |
| Trigger types | Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle |
| Trigger Source | Any scope input channel, or external via DMM input on 190-XX2, 2 channel models |
| Glitch capture | 8 ns |
| Scope Measurements | Cursor: 7, Automatic: 30 |
| Max. Record Length | ScopeRecord mode: 30,000 pts, Scope mode: 10,000 pts per input |
| Persistence | Digital persistence giving analog oscilloscope-like waveform decay |
| Waveform Compare | Waveform reference with automatic Pass/Fail testing |
Click on a category to view a selection of compatible accessories with the Fluke 190-502/AM Color ScopeMeter Color Test tool, 2 Channel, 500MHz.
