Durable, this multifunction installation tester with a 12' probe delivers the full-featured functionality and advanced measurement capabilities that professional installers need. It features an on/off switchable auto-start for RCD and loop test, and self-test to save time and give you more confidence in your results.
Durable, this multifunction installation tester with a 12' probe delivers the full-featured functionality and advanced measurement capabilities that professional installers need. It features an on/off switchable auto-start for RCD and loop test, and self-test to save time and give you more confidence in your results.
Discontinued!
This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:
Visit our Test Leads and Probes category for similar products.
Or let's do a search and help you find what you need:
Features
| Temperature Range | -328 to 1238°F (-200 to 670°C) |
| Nominal Resistance at 32.018°F (0.01°C) | 100 Ω ±0.5 Ω |
| Sensor Length | 1.2 ±0.2" (30 mm ±5 mm) |
| Sensor Location | 0.1 ±0.1" (3 mm ±1 mm from tip) |
| Minimum Insulation Resistance | 500 MΩ at 23°C, 10 MΩ at 670°C |
| Maximum Immersion Length | 12" (305 mm) |
| Response Time | 12 seconds typical |
| Lead-Wire Cable Type | Teflon, 24 AWG |
| Lead-Wire Length | 6' (1.8 m) |
| Lead-Wire Temperature Range | -58 to 482°F (-50 to 250°C) |
Click on a category to view a selection of compatible accessories with the Fluke 5609-BEND-A Secondary Reference PRT with 90° bend and INFO-CON for 914X Models, 12' probe.
| Temperature Range | -328 to 1238°F (-200 to 670°C) |
| Nominal Resistance at 32.018°F (0.01°C) | 100 Ω ±0.5 Ω |
| Sensor Length | 1.2 ±0.2" (30 mm ±5 mm) |
| Sensor Location | 0.1 ±0.1" (3 mm ±1 mm from tip) |
| Minimum Insulation Resistance | 500 MΩ at 23°C, 10 MΩ at 670°C |
| Maximum Immersion Length | 12" (305 mm) |
| Response Time | 12 seconds typical |
| Lead-Wire Cable Type | Teflon, 24 AWG |
| Lead-Wire Length | 6' (1.8 m) |
| Lead-Wire Temperature Range | -58 to 482°F (-50 to 250°C) |
Click on a category to view a selection of compatible accessories with the Fluke 5609-BEND-A Secondary Reference PRT with 90° bend and INFO-CON for 914X Models, 12' probe.
